Seismic Tekton 6-Ball Bearings

From The Freestyle Knowledge Base
Revision as of 20:37, 27 October 2016 by Admin (talk | contribs)
Jump to navigation Jump to search
seismicskate.com
Integrated Half-Spacer


Features

Make Seismic Skate Inc.
Model Tekton 6-Ball
ABEC Rating 7
# of Balls 6
Ball Material P4 rated steel
Seal Removable rubber-coated steel seals
Integrated Spacers Integrated, flanged half-spacers
Ball Retainers DuPont engineering-grade Nylon
Lubrication High-end Japanese Kyodo grease
Colors Red
Graphics Printed graphics on seal
Special Features Self-aligning design. Integrated axle washers. Larger balls than ordinary 608Z bearings
Available at seismicskate.com

amazon.com

Product Webpage seismicskate.com
Introductory Price $45.00 (Set of 8)
Patent United States Patent 9,149,713
Release Date 2012

Product Description

The bearing behind the Official Downhill Speed World Record – 80.83 mph by Mischo Erban!

Now with tighter assembly tolerances!

Breakthrough self-aligning design corrects for flaws in bearing seat levelness, bearing seat spacing, axle diameter and axle straightness.

The 6-Ball Tekton is constructed with fewer, larger balls than ordinary 608Z bearings. This means less ball-raceway surface contact area, less friction, quicker acceleration, higher speed, and longer life.

Seismic® Tekton bearings feature wide, flat contact surfaces at the ends of integrated, custom-machined half-spacers. The broad flanges square up, co-align and self-stabilize inside your wheels – correcting for flaws in bearing seat levelness, bearing seat spacing, axle diameter and axle straightness.

The Tektons literally block themselves from sitting or rocking out of alignment, so they stay straighter than any other bearing system ever. Your wheels roll faster with better control, while the bearings last longer and stay quieter.

Other features include: advanced 6-ball construction, nylon retainers, black outer casing, removable rubber-coated steel seals with printed graphic, and high-end Japanese Kyodo grease. Construction meets or exceeds requirements for ABEC-7 rating.

The inner race is stepped underneath the seal to resist contamination, and it’s stepped between the bearing and the flange to save weight. On the side opposite the flange, the inner race extends 0.5mm to form a thin integrated washer. No bearing spacers, axle washers, or World Record budgets required!

Advanced Self-Alignment

Patented design integrates wide, flat contact surfaces on ends of custom-machined half-spacers. Broad flanges square up, co-align, and self-stabilize inside wheels. Corrects for flaws in bearing seat levelness and spacing / axle diameter and straightness.

Self-straightening: Prevents bearings from sitting or rocking out of alignment better than any other system.

Self-supporting: Protects bearings from internal stresses.

Advanced Construction

Packed with premium “high RPM” light grease, formulated by one of the world’s most renowned lubricant suppliers.

Inner race specially contoured underneath seal to resist contamination, and stepped between bearing and flange to save weight. Extends 0.5mm on side opposite flange to form thin integrated washer.

Retainers made of Dupont engineering-grade Nylon for superior durability.

Degree of play engineered for balanced performance and wear across all skating disciplines. Not too much, not too little.

Advanced Ball Specifications

Balls rated P4, the highest grade available. Superior concentricity, surface smoothness, speed and durability.

6-Ball Tektons constructed with fewer, larger, stronger balls. Less total ball-raceway surface contact, less friction, quicker acceleration.

Ceramic Tektons feature lightweight, rustproof trisilicon tetranitride (Si3N4) balls. Lighter, tougher balls mean less friction, quicker acceleration, more speed! Harder than steel, black ceramic crushes debris, keeps raceways clean. Runs cooler, too.